null Skip to main content

Alternative Platypus License Plate Mount Install Guide - Porsche

THANK YOU for purchasing the Porsche Alternative Platypus Installation Guide from CravenSpeed. This product is made from the highest grade materials and is guaranteed to be free from defects.

You can buy our CravenSpeed Alternative Platypus License Plate Mount for Porsche here

PanameraFinal.jpg

Parts Included:

  • 1x Plate Mount
  • 1x Tow Hook Stud
  • 4x Stainless Steel Screws
  • 1x Platy Extension
  • 2x 10mm Bolt (1x long and 1x short)

Tools Required:

Procedure

arrow-tip

    1. Attach the extension to the Platypus Plate with the four pegs for the license plate facing you, and the extension arm behind the plate. Make sure the nut is behind the plate as well.

    When you’re done with this step, it should look like this.

    IMG_9850.JPG

    2. Screw the Stud into your car like you would with any other platypus installation.

    IMG_20140515_130001.jpg

    IMG_9797.JPG

    3. Use the remaining 10mm bolt to attach the extension arm to the stud.

    IMG_9851.JPG

    4. Attach your plate, and drive!

!