Classic Gauge Kit

100% Complete Package

The goal of our classic gauge kits is to make installing auxilliary gauges easier than ever by including every last piece of hardware you will need to install the selected gauges in your car. From sender adapters, to wiring, the gauge mounts, the gauge itself, everything down to the last zip tie, we've included all of the pieces you'll need to get the job done. Our kits feature high quality analog gauges from Marshall Instruments which are Made in the USA.

Boost

A boost gauge is easily the most fun gauge to watch when you are enjoying your forced induction car. While fun alone is reason enough to install a boost gauge, they have some practical uses too. By monitoring boost pressure, you can quickly identify issues like boost leaks, overboosting, or underboosting. This allows you to address problems before they cause significant damage to your engine or turbocharger.

Tapped In

In our 1st Gen MINI kit, the boost gauge simply taps into an existing vacuum line to measure boost pressure. This kit features a standard Marshall Instruments gauge which measures vacuum and boost from -30 inHG to 30 psi and has a silver face to match the factory cluster.

Oil Pressure

An oil pressure gauge provides real-time monitoring of your engine's oil system, allowing for early detection of problems like leaks, pump failures, or clogged filters. In the event of a major leak or catastrophic failure of the oil system, an oil pressure gauge can prevent terminal damage to your engine by giving you time to shut the car down. The gauge provides a continuous reading of oil pressure, allowing you to monitor the engine's health under various driving conditions.

Tapless Adapter

On 1st Gen MINIs we use our Tapless Adapter which piggybacks off of the factory oil pressure sensor near the oil filter and provides a 1/8 NPT port to install the oil pressure sending unit. This version of the kit includes a Marshall Instruments oil pressure gauge which measures oil pressure from 0 - 100 psi and has a silver face to match the factory cluster.

Oil Temp

Oil temperature is a key performance metric to monitor in your engine. During spirited or track driving, an oil temp gauge will tell you when it's safe to start pushing and when you need to back off. During normal driving, monitoring oil temp can give premptive warning to other issues such as cooling system failure or low oil level. The gauge provides a continuous reading of oil temperature, allowing you to monitor the engine's health under various driving conditions.

Ease of Use

On 1st Gen MINI's we use our oil drain plug sender adapter which allows for the temp sender to be installed directly into the oil drain plug. This version of the kit includes a Marshall Instruments oil temperature gauge which measures oil temperature in Fahrenheit from 140° - 280° and has a silver face to match the factory cluster.

Gauge Mount

This kit includes our triple guage mount for the **make** **model** **gen**. The bracket simply attaches to the back of the tachometer and provides a mounting location for three of our 52mm gauge cups. The gauges will surround the tachometer and can be configured to sit above or below it.