Lightweight Pulleys
CS-AA862-A76
CravenSpeed
Scratch and Dent?
Occasionally, we get new parts or returns that have cosmetic blemishes that do not affect the functionality of the part. Rather than toss them in the scrap bin, we offer the parts for sale at a deeply discounted price. In many cases, the location of the blemish prevents it from even being seen once the part is installed. Like all of our products, we still guarantee it to be the correct fit and to work properly and will offer to exchange components should anything need adjustment, or simply set up a free return if you decide that you are not happy with the product. Our normal return policy applies to all scratch and dent products.
Take the load off
The math is pretty simple, it takes power to spin a pulley. The heavier the pulley is, the more power it will take to spin it. Your motor is limited in how much power it can make. By swapping to a lighter pulley your motor will spend less power spinning pulleys, and more power spinning the wheels. Since it's easier to get the pulley spinning in the first place, you'll also see an improvement in throttle response. Not to mention that you'll be shedding nearly 3.5 lbs from your Mazda CX-30 (2020-2025).
Fitment Notes
These pulleys are designed for Mazda cars with both manual and automatic transmissions, though the automatic will need the flywheel adjusted to install the pulley. These pulleys are only intended for the models with the Skyactiv-G 2.0 (PE-VPS) engine equipped.
If you have an alternator decoupler , the alternator pulley will NOT fit. This includes the models with Mazda's i-ELOOP and and i-STOP systems. Not sure? Send an email to support@cravenspeed.com and we'll be happy to help!
The Complete Package
To maximize results, we've built this kit to replace three of the pulleys on the accessory drive system of Mazda CX-30 models with the Skyactiv-G 2.0 (PE-VPS) engine. The pulleys replaced are the crank, water pump, and alternator pulley. All three CravenSpeed pulleys match the stock pulley diameters, so the stock belt sizes are maintained, and accessory output is unchanged. They are precision machined from aluminum for perfect balance, and anodized black, right here in the USA. Installation of these pulleys is fairly straight-forward with no specialized tools required. We'd expect it to take 2-3 hours.
Notice: This product has NOT been certified for legal use in CA and other states adopting CA emissions standards under Section 177 of the Federal Clean Air Act of 1970. Please check with laws in your area to make sure that your use of this product is compliant with current regulations in your jurisdiction.
Free Domestic Shipping
We ship orders every weekday. All orders placed by 2:00 pm PT will ship the same day. You will receive a shipping notification when we print the label for your order. The tracking will not indicate that the order has been shipped until it is picked up and scanned in by the carrier. Orders placed after 2:00 pm PT on Friday will ship on Monday.
Our Team is comprised of a small group of dedicated individuals who each pride themselves on providing their best work to our customers every day. We are all willing to go above and beyond for our customers to make sure they are happy with their entire shopping experience. If you need anything, please drop us a line at support@cravenspeed.com and we'd be happy to help you out. Our customer service team will usually get back to you within the hour during business hours.
Click here to meet the team!